Rhino Shine Snow Foam is a pH neutral pre-wash developed for maximum cleaning power without compromising protection. It is designed to break the bond between traffic film, road grime, and the surface of the vehicle, helping to safely remove as much contamination as possible before contact washing begins. This reduces the risk of swirl marks and scratches while making the wash process significantly more effective.
Unlike many pH neutral foams that focus on appearance or gloss, this formula is built purely for performance. It produces a medium-thickness foam that clings long enough to clean without drying too quickly. The consistency has been carefully balanced to ensure effective coverage and prolonged dwell time without sacrificing rinsability. It does not contain gloss enhancers, waxes, or any protective additives. This is a pre-wash that does its job without interference.
Fully safe for use on ceramic coatings, waxes, and sealants, Rhino Shine Snow Foam lifts dirt and film from the surface while leaving protection untouched. It is clear, unscented, and supplied as a concentrate with a recommended dilution of ten to one when used through a foam lance. It can also be applied via pump sprayer where needed.
Whether you are an enthusiast maintaining your own vehicle or a professional preparing cars daily, this snow foam is built to perform consistently and effectively across all levels of use.
Directions:
Dilute the product at a ratio of ten to one when using through a foam lance. Add 100 millilitres of concentrate to 900 millilitres of clean water to produce one litre of ready-to-use solution.
Apply a generous layer of foam to the vehicle, starting from the bottom and working upwards to maximise dwell time. Allow the foam to dwell for three to five minutes, or as long as possible without drying on the surface. For heavy contamination, the product may be agitated with a soft brush or mitt to help loosen dirt from badges, grills, and trims.
Rinse thoroughly with clean water, starting from the top down. Do not allow the product to dry on the surface. In hot weather or direct sunlight, work in sections or shade where possible.
Rhino Shine Snow Foam is suitable for regular use as part of a maintenance wash and can be used safely on coated, waxed, or sealed vehicles without affecting protection.
